Job Title: Metrologist
Job Category: Service Contract Act
Time Type: Full time
Minimum Clearance Required to Start: Secret
Employee Type: Regular
Percentage of Travel Required: Up to 10%
Type of Travel: Local
* * *
The Opportunity:
* CACI is looking for a Metrologist to join the team at the Naval Surface
Warfare Center, Carderock Divisions (NSWCCDs) Fabrication Team In this role,
you will utilize high precision measurement equipment (coordinate measurement
machines (CMMs), laser tracker equipment, ultrasonic devices, calipers,
verniers, electronic protractors, squares, height gauges, depth gauges,
indicators, and micrometers) and perform computerized spatial analysis.
Calibrate equipment then measure item geometry and spatial relationships.
This includes small and large-scale items requiring dimension and tolerance
analysis to determine accuracy. Shall restrain items to prevent hog and sag
deformation prior to measurement. Provide Tolerance Measurement Study upon
completion. Perform preventative and routine maintenance and calibration of
measurement equipment as needed and issue calibration certificates.
Responsibilities:
* Prepare measurement reports per customer specifications. Determine if first
article parts are acceptable.
* Implement new innovative practices to promote part accuracy, and proficiency.
This may include, but is not limited to, new reporting templates or formats
that better facilitate the documentation, reporting, and tracking of
precision measurement activities.
* Utilize PC-DMIS as the primary metrology software (with Polyworks as a
secondary tool) to inspect high-tolerance finished components designed with
minimal fixturing to perform first-article inspections.
* Leverage PC-DMIS and Polyworks capabilities to advise shop management,
supervisors, and planners during the planning and costing phase regarding the
difficulty, complexity, and potential issues that may arise during the
inspection process.
* Analyze and diagnose complex problems that arise during the inspection
process. Utilize PC-DMIS, Polyworks, or Spatial Analyzer to determine the
root cause of potential issues and develop robust methods and processes to
ensure similar issues are reduced or eliminated in future tasks.
* Utilize PC-DMIS or Polyworks software to perform Laser Tracker measurements
in strict accordance with Model Fabrication Facility policies and standard
operating practices.
* Adhere to the Model Fabrication Facility policies and standard practices were
applicable.
* Design specialized tooling fixtures to be used to support the production of
complex machined components
* Applies knowledge of engineering disciplines in structural design, weld
design materials applications and prototype design
* Skilled in the interpretation of complex engineered drawings, sketches and
verbal communications.
Qualifications:
Required:
- High School diploma or equivalent.
- Must have significant experience writing, troubleshooting, and running
PC-DMIS inspection programs.
* Experience with utilizing high precision measurement equipment (coordinate
measurement machines (CMMs), laser tracker equipment, ultrasonic devices,
calipers, verniers, electronic protractors, squares, height gauges, depth
gauges, indicators, and micrometers) and performing computerized spatial
analysis
* Knowledge of manufacturing trades including industrial and commercial
manufacturing processes to contribute to the engineering design and
development function
* Ability to collect and analyze data in test samples and fabrication mockups
and apply the data collected to the fabrication of future high cost
components and models
* Experienced in inspecting and dimensionally verifying components and models
to ensure compliance with dimension specified in drawings, specifications and
control documents.
* Experience with generating and delivering measurement reports per customer
specifications
* Thorough understanding of geometric dimensioning and tolerance practices,
including NIST.
- Ability to read and work from highly detailed drawings and specifications.
- Desire to learn, ask questions, and take initiative within safety and skills
limitations.
Physical:
* Office, industrial and construction settings; the work requires the employee
to spend most of the day standing, kneeling, or sitting in awkward positions.
S/he will lift weights up to 80 lbs. S/he will work from ladders and
scaffolds, also trenches, and hard to reach places by bending, stretching,
and stooping
Working Conditions:
* You will frequently work inside and outside of buildings. S/he will work in
cold weather. S/he may be working in the hot sun. S/he will work in
environments where ventilation or respirators may be necessary. S/he must be
safety minded about themselves and others. S/he will check tools and
equipment, and see their capacities are not exceeded; and that tools are kept
in a safe working condition.
* Physical: (1) Lift up to 80 lbs. (2) Work in Industrial and Test Facility
Environment including cranes, fork trucks and vehicle operations.
* Hazardous Duty: Perform work in industrial settings where the potential for
hazards exists. However, the use of engineering controls, materials
substitution and personal protective equipment reduce or eliminate hazard
exposure. Incumbent is regularly exposed to the hazard of: noise, electrical
shock, wet surfaces, and climbing. The contractor will occasionally use
hazardous materials e.g. various oils and solvents. The contractor is
occasionally exposed to high work and confined space.
Desired:
- Possess a working knowledge of machining and sheet metal processes.
- Familiarity with NAVSEA, Navy, or other military standards for fabrication
- Experience with PolyWorks and Spatial Analyzer
-
What You Can Expect:
A culture of integrity.
At CACI, we place character and innovation at the center of everything we do. As
a valued team member, you’ll be part of a high-performing group dedicated to our
customer’s missions and driven by a higher purpose – to ensure the safety of our
nation.
An environment of trust.
CACI values the unique contributions that every employee brings to our company
and our customers - every day. You’ll have the autonomy to take the time you
need through a unique flexible time off benefit and have access to robust
learning resources to make your ambitions a reality.
A focus on continuous growth.
Together, we will advance our nation's most critical missions, build on our
lengthy track record of business success, and find opportunities to break new
ground — in your career and in our legacy.
Pay Range:
This posting is for a position covered by the Service Contract Labor Standards
(SCA). The pay and benefits provided for this position will meet or exceed the
minimum required amounts detailed in the wage determination issued by the
Department of Labor and made applicable to this position, as incorporated into
CACI’s government contract for the work location.
Minimum Required Hourly Wage:
$35.64
There are a host of other factors that can influence final salary including, but
not limited to, geographical location, relevant prior work experience, specific
skills and competencies, education, and certifications. Our employees value the
flexibility at CACI that allows them to balance quality work and their personal
lives. We offer competitive compensation, benefits and learning and development
opportunities. Our broad and competitive mix of benefits options is designed to
support and protect employees and their families. At CACI, you will receive
comprehensive benefits such as; healthcare, wellness, financial, retirement,
family support, continuing education, and time off benefits.
CACI is an Equal Opportunity Employer. All qualified applicants will receive
consideration for employment without regard to race, color, religion, sex,
pregnancy, sexual orientation, age, national origin, disability, status as a
protected veteran, or any other protected characteristic.
